Shenyang xinruite helps you to analyze the problems that need to be paid attention to when using the automatic strip welding machine:

1. For the barrel welding of steel plate with thickness above 2mm, due to the large gap of welding seam, the base material of the workpiece itself can't be used to fill the welding seam, forming a welding defect. At this time, it is necessary to add an automatic fillet filling mechanism to increase the melting amount of metal in the welding process to fill the welding seam and reach a high-quality welding seam.

2, for more than 2000 mm long weld workpiece welding, due to equipment's error or the artifact itself, easy to cause weld forming, or bad weld offset, or oscillating system, so need to configure the tracking system can overcome caused by weld bend bite edge or defects such as lack of penetration, can we truly achieve automatic welding, achieve the result that provide efficiency and welding quality.

3. Heat sources of straight seam automatic welding machine mainly include tungsten electrode argon arc welding machine, plasma welding machine, CO2/MIG/MAG melting electrode gas protection welding machine, submerged arc welding machine, laser welding machine, etc. For aluminum, magnesium and alloy, the general use of ac argon arc welding machine or MIG welding machine welding. For stainless steel all dc welders except CO2/MAG welder are available. For ordinary carbon steel shenyang xinruite all the above welders are recommended.