Machines and people need regular maintenance, in order to play a large function. Otherwise, he will occasionally lose his temper. Cold cutting saw is the same, the need for regular

maintenance personnel. The following are the daily maintenance points of the cold cutting saw:

Check whether the pipe diameter, wall thickness and pipe length are set correctly and calibrate the pipe length once a day.

Check whether there is water and oil around the equipment and clean up in time.

Linear guide, bearing daily cleaning iron cutting, add oil

Check whether there is iron scrap and other sundries in the position of equipment and fixture, and clean up in time.

Guide, slide to add lubricating oil, pay attention to do not add dry oil, every day to clean the guide iron cutting. Cold cutting saw

Check all bolts and clamps for loose screws.

Check whether the jig oil cylinder or cylinder leakage or leakage, rust phenomenon, should be replaced in a timely manner.

Check whether the oil pressure and air pressure are within the specified range (pressure gauge of hydraulic station, air pressure of furniture cylinder, air pressure of measuring speed cylinder, air pressure of clamping roller cylinder)

Check the position and wear of the steel brush, adjust or replace it in time.

Inspect blade wear and replace as appropriate. (due to different materials and cutting speed, it is recommended to determine whether to replace the saw blade according to the quality of the cut and the sound of the cutting.) to replace the saw blade, use a wrench, not a hammer. The new saw blade needs to confirm the diameter, number of teeth and thickness of the cold cut saw blade.